- Plasma Cutter, Touch Metal get arc starting, 45Amps cutting current in voltage 220V, 35Amps Cutting current in voltage 110V. Machine with current display, range from 15 to 45Amps. Post time can be adjust from 2 to 15 seconds. Machine easy cut stainless steel, Carbon steel, Alloy, etc.
- The air compressor we suggest it can supply the air 30L/min, Better 40L/min. Air gauge pre-fixed at front panel of machine, The user easy read air pressure through it. Machine also with post time function can adjust post air cooling the torch head.
- We suggest the power breaker more than 35Amps If plug to 110V, Need breaker more than 30Amps if plug machine to 220V. The fan will work when needed, Means the fan only start to work if temperature reach the point. This function will reduce the dust into machine, In this way to protect the electronic parts.
- This air plasma cutter is dual voltage 110/220V, It is auto indicate the input voltage, no need to switch the voltage by handle on side of machine, But still need to plug machine by hand to different power source.
- Under voltage: 220V, The cutting quality cutting thickness is 6mm at 65PSI, Severance cutting thickness is 10mm at 65PSI. Under voltage: 110V, The cutting quality cutting thickness is 6mm at 65PSI, Severance cutting thickness is 8mm at 65PSI
No reviews yet