Plasma Cutter – AMERICAN PORTAL – A Prices For Everyone’s Budget

Plasma Cutter –  AMERICAN PORTAL – A Prices For Everyone’s – Budget

Plasma Cutter 2in1 TITAN-5200G

(4.5 out of 5 stars from 2 Reviews)

$649.99

Last updated on: 23/03/2022 13:31
Plasma Cutter, ,
ColorWite
Voltage110V or 220V,
Output Range50/200AMP
Item Weight36 pounds
Package Dimensions 23 x 17 x 12 inches
Non-Touch Pilot
Air Compressor

High Quality Digital Design, 70% DUTY CYCLE [—–] Adjustable Pre-flow time / Ignition current and slope time can be set / Peak current and basic current can be set under pulse / Slow down can be set and the final ARC can be set after finish welding / Adjustable Post flow time [—–] 2T, 4T is available / Can save the operation program, convenient to use the machine for the next usage. / Automatic sensing of incoming power source voltage and frequency 120V/240V-50/60HZ (functions between 90 & 260 volts.) / Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm (0.4 Mpa). / Max diameter of rod 5.0 mm [—–] Equipped with a large cooling fan and is thermostatically protected for a longer life span. / Advanced inverter technology => high cutting and welding performance. / Plasma Cutter is 3/4″ rated with 1/2″ clean cut / TIG Welder has a 5/16″ weld thickness / ARC/MMA Welder has a 3/16″ weld thickness / CE, CCC, CSA and ISO-9001 certification [—–] Spec: Input voltage AC 110/230±15% 50/60Hz / Input Power Capacity 4.8 kVa / No-load loss(W) 40 / Duty cycle (%) 70 / Power factor 0.93 / Efficiency (%) 85 / TIG MMM CUT / Rated Input Power(A) : 14.7 23.7 28.7 / Rated output current: 200A 200A 50A / Current range: 10-200 10-200 10-50 / Rated output voltage(V): 18 40 29 / No –load loss(w) : 40 98 40 / Cut thickness(mm): 1-16 / Arc-leading / HF TOUCH HF / Air flow(L/min): 2-5L/min – 80 L/min / Package weight: 50 lbs [—–] Comes with: AG-60 cutting torch / Tig Welding Torch (with long and short caps) / Ground cable with clamp Stick (ARC) Holder / Initial Consumables / User Manual / Digital Remote Finger Control [—–] You shall provide 60~70 psi air supply, 110v or 220v power plug. / You shall provide argon regulator, tank for TIG welding

No reviews yet


Got a question or an opionen about this product? Share it with us!

Your email address will not be published. Required fields are marked *


$649.99

Last updated on: 23/03/2022 13:31